If you've never had a windshield replaced before, the whole process might seem mysterious or daunting. What does the technician actually do? How long does it take? Is it safe to drive right away? These are all valid questions — and we believe in complete transparency about our work.
Here's an honest, step-by-step breakdown of exactly what happens during a professional windshield replacement with Skyview Auto Glass.
Step 1: Pre-Job Inspection and Setup (5–10 minutes)
When our technician arrives, the first thing they do is inspect the vehicle thoroughly. This includes checking the existing windshield and frame for any corrosion, damage, or prior improper installations that need to be addressed. They also inspect the vehicle's pillars and cowl area for any water damage that might indicate a previous seal failure.
The technician then sets up their work area, lays protective covers on the hood and interior, and unpacks the replacement glass. We pre-check the glass to ensure it's the correct part number for your specific vehicle year, make, model, and trim — because improper glass can affect ADAS sensor calibration and structural integrity.
Get Our Free Auto Glass Guide
Insurance checklist, repair vs. replace guide, and 5 questions to ask any glass company — sent instantly to your inbox.
Step 2: Removing the Old Windshield (15–20 minutes)
Using a specialized cold knife tool, the technician carefully cuts through the urethane adhesive bonding the windshield to the vehicle frame. This requires skill and care — a rushed removal can damage the paint, pinch welds, or vehicle frame.
Suction cups are used to safely remove and dispose of the old glass. The technician then carefully removes any remaining adhesive, rust, or debris from the frame surface to ensure the new windshield will bond correctly.
Step 3: Preparing the New Glass (10 minutes)
Before the new windshield is installed, the technician cleans it thoroughly with an automotive-grade glass cleaner and applies a glass primer to the edges. Primer improves adhesion and prevents moisture intrusion over time. This step is critical and often skipped by inexperienced or rushed technicians — which is why we always take our time here.
Step 4: Applying Urethane Adhesive (5 minutes)
A continuous bead of high-strength urethane adhesive is applied around the perimeter of the vehicle frame opening. The type and brand of urethane we use is rated for auto glass safety-standard-compliant installation and provides the structural bond that makes the windshield an integral part of your vehicle's safety system — not just a piece of glass.
Step 5: Setting the New Windshield (5–10 minutes)
Using suction cups and precise alignment tools, the technician carefully lowers the new windshield into position. This step requires accuracy — a misaligned windshield can leak, rattle, or in severe cases interfere with airbag deployment. The glass is gently pressed into the urethane and aligned with reference marks on the vehicle frame.
Step 6: Final Inspection and Cleanup (5–10 minutes)
Once the glass is set, the technician inspects the perimeter seal for any gaps, bubbles, or misalignment. Interior trim pieces are carefully replaced. The entire work area is cleaned — inside and out — and the technician will check any moldings, wiper arms, and sensors to ensure everything is reconnected properly.
Total Time: about 45 to 75 minutes, plus a 30-minute safe drive-away time
The full replacement process typically takes about 45 to 75 minutes for the installation, plus a 30-minute safe drive-away time. The glass needs additional curing time before you drive.
Safe Drive-Away Time
After installation, you'll need to wait at least 1 hour before driving at highway speeds, and ideally 48 hours before a car wash. During this time, keep one window slightly cracked to equalize pressure. Don't remove any retention tape the technician may have placed on the moldings for the first 24 hours.
ADAS Camera Recalibration
If your vehicle has Advanced Driver Assistance Systems (ADAS) — lane departure warning, automatic emergency braking, or forward collision warning — the camera mounted behind your windshield may need to be recalibrated after replacement. We can advise you on whether your specific vehicle requires this step and where to get it done.
Your Lifetime Warranty
Every Skyview windshield replacement comes with a comprehensive lifetime warranty covering workmanship defects, leaks, and adhesive failure. Schedule your replacement today and drive with confidence knowing your installation is backed by the best warranty in the business.
Common questions
What happens during a car windshield replacement?
During a car windshield replacement, the technician inspects the vehicle, removes the old glass and trim, prepares the pinch weld, lays a fresh urethane bead, sets and aligns the new glass, and refits the trim and wipers. If the vehicle has a forward camera, calibration is done as part of the same job. The full windshield replacement takes about 45 to 75 minutes, plus a 30-minute safe drive-away time.
Do you use OEM glass for auto windshield replacement?
Yes. We use OEM (Original Equipment Manufacturer) glass or OEM-equivalent glass that meets the original factory tolerances for fit, clarity and sensor alignment. The choice between them is one of sourcing, not quality, and we confirm which is being used before installation. Auto windshield replacement with the correct glass is what keeps ADAS camera positioning working.
When can I drive after a windshield replacement?
You can drive after the safe drive-away time — the point at which the urethane bond is strong enough to hold the glass in a collision. The technician confirms the time for the adhesive and conditions on the day. See our safe drive-away time page for the figure and what changes the wait.
Frequently asked questions
Can I replace a windshield myself?
It isn't recommended. The windshield is bonded to the body as a structural part, and removing it without the right tools can damage the frame or paint. The urethane has to be applied correctly and given its safe drive-away time, and on vehicles with a forward camera the system must be recalibrated afterward.



